Guaranteeing the most thrilling and energy efficient underwater ride ever.


Sea Doo Seascooter RS2 represents the right compromise between performance and price.

RS2 model has all the qualities of its class, but with an eye focused on the price. Its color is pearl gray, with shiny black grid protection for the propeller and scratch-resistant black handle.


RS2 Sea Doo Seascooter has a shape that’s designed to be as streamlined as possible.

Starting from the propeller, it can be seen how this aquascooter is totally safe: the generous two-bladed propeller, connected to the shaft that comes out of the gear box, is inserted into a venturi which shows a rear grid and a series of side members attached to the body of the vehicle, ensuring that no one can be injured by the propeller. Despite this, as explained in the user guide that can be downloaded from the “DOWNLOAD” section of this page, you need to collect your long hair and remove any necklace or bracelet, because the protection is meant to ensure the blade the greatest amount of water possible, without compromising performance.

Aquascooter handle is central to the body and designed to allow the user the best position while driving. Correct position and function are described in the user guide.

The upper part has three hinges for the opening of the cap which leads to battery compartment. The materials with which RS2 is built are resistant to deteriorating agents that are present in water and prevent aquascooter deformation over the years. There is no need of sacrificial anodes, since it is totally immune to galvanic currents present in water.


The construction of the Sea Doo Seascooter RS2 permits neutral buoyancy: when released, it will remain in its position. This feature has been achieved thanks to the water that’s present between the outer shell and the inner. It is then crucial rinse it with fresh water after each use, to allow the outflow of all the impurities from where they could hide and cause injury to materials and mechanisms.

Li-ion battery, brushless electric motor, transmission belt, battery charge and absorption control, absorption current control, water infiltration warnings, double seals: they are all points to keep in mind when talking about the technology used in the design of Sea Doo Seascooter RS2 aquascooter.

The controls of Seadoo Seascooter are positioned so as not to tire the user and complying with the european laws that stipulate that the vehicle has to turn off when one of user’s hand is not guiding it.

In fact, by turning off one of the two buttons during use, the propeller will stop immediately.

The same commands are used to manage the three available speeds with a simple double press of a buttonì.

Recharging process is simple: by opening the three snap hinges that hold the top cover you can access the screw cap that lets you insert the charger directly into the lithium ion battery.



Watertight is ensured and tested up to 40 meters deep: resists static pressure of 5 atmospheres. Maximum speed (third speed available) is 6 Km / h and can cover nearly 3 km on a single charge. Its powerful 350 watt motor, activated at the first speed, and can last for about 75 minutes.

The lithium-ion battery – 22.2V 8Ah – recharges in just four hours. This sealed battery can be removed by taking off the cover with the use of the provided air pump, then recharged comfortably at home.

* Specifications are tested in a controlled way. The speed is defined as speed of the water that leaves the pump with the product in the pool. All values are valid only for product as new and in perfect condition.



In the original package you will find your original Sea Doo Seascooter RS2 packed with polystyrene contours to ensure the total safety of the aquascooter during the transport (please keep the original packaging), 220V battery charger, the silicone grease for the seals, ballast weights to make negative buoyancy, air pump to remove battery chamber, flow deflectors for stabilization and use and maintenance instructions.

You can also buy the carrying case with shoulder strap and floating weights, branded RS Sea Doo Seascooter, to make positive your aquascooter.

In addition there is the possibility to use the battery of RS1 model – 22.2V 12Ah – which brings the maximum range of RS2 model, in the first speed, to 120 minutes.



Thanks to the partnership with GoPro, all RS models are equipped with built-in GoPro support to be placed over the handlebars, so that you can resume perfectly everything that happens.

GoPro accessory holder is affordable and can be installed on all previous years RS.

Buy a GoPro camera with your new RS2 Sea Doo Seascooter and save on total cost of the two items!


  • Maximum depth: 40 meters (130 ft)
  • Recommended maximum depth: 30 meters (100 ft)
  • Power supply: Lithium battery
  • Battery voltage: 22.2 V
  • Battery strength: 8 Ah
  • Range at first speed: 75 minutes
  • Battery pod: with waterproof vent plug
  • Dimensions: 61x30x32 cm
  • Weight: 8,6 kg
  • Power: 350 watts
  • Maximum speed: 6 km/h
  • Gears/speed: 3
  • Buoyancy : neutral
  • Floating chamber: autofill
  • Modification structure: possible thanks to 4 supplied seals
  • Handle: Ergonomic
  • Automatic shutdown: if released a trigger
  • Indicator of battery charge LED
  • Circuit pond
  • Warning signal for water infiltration
  • Automatic shutdown


  • Charger for fast charging 220V
  • Li-ion battery 22.2V / 8Ah – rechargeable
  • User guide in English
  • Blower to remove battery cover
  • O-ring for retention battery cover (refer to the user guide)
  • Silicone gel to use O-rings and seals
  • Ballast weight
  • Deflectors
  • GoPro mounting kit